Αναζήτηση

Στοιχεία Επικοινωνίας

Δ/νση: Πάροδος Σπηλαίου Πανός
19007, Μαραθώνας, Αττική
Τηλέφωνο: +30 22940 69080
Φαξ: +30 22940 69082
Κινητό: +30 6944223696
E-mail:

Ωράριο Λειτουργίας Καταστήματος: Καθημερινά 8-14, Απογεύματα και Σαβ/κα κατόπιν ραντεβού.
Ωράριο Επικοινωνίας: Καθημερινα 8-20

Δείτε μας στο χάρτη
Technical specification form

Carcase

Worktops

Plinths

18 mm thick wood particleboard of class E1 (low formaldehyde content), coated with melamine resins, in compliance with the European norms (EN 120/92). The edges are in non-toxic material (ABS), applied using heat melting glues.
Backs: 3 mm thick MDF of class E1. They are balanced on the back and are faced with decorative paper.
Shelves: 18 mm thick squared and edged panels, in woods colours that match with the carcase. Upon request, the shelves are also available in 8 mm polished glass.
Wood particleboard of class E1 that have undergone a water-repellent treatment, cat. V100, available either 40 mm or 60 mm thick. The top laminate sheet and the bottom sheet of the post-formed top are heat-glued with water-repellent glue. The edges are in laminate. The laminare (HPL) is compliant with the European Norm EN438 HPL. Further tops available on demand include: 40 or 60 mm high laminate top with aluminium profile in satin or glossy finish; 12 mm thick HPL stratified laminate tops; top with stratified laminate edges 20 to 100 mm thick, or else stainless steel tops.Rigid extruded PVC with a top coating and soft PVC gaskets for perfect adherence to the floor. A quick-fix mechanism enables to remove the feet when clearing the floor. The fridge plinth is supplied with a ventilation grid for the fridge.
Feet: the feet are in high resistance plastic. Thanks to an adjustment system, they can be used to adjust the height of the units; each foot is fitted with a system that locks it to the plinth.

Hangers

Sink unit

Refrigerators

The hangers are in nylon, with pins with a 10 mm diameter for fixing to the carcase, and a top. They can be adjusted in depth and height (maximum capacity 65 Kg each). Furthermore, they are fitted with a support bar in metal.
Shelves: the shelves are in class E1 particleboard (low formaldehyde content), surfaced with post formed laminate on one or on two sides. Nominal thickness 30 mm or with 20 mm thick ABS edges.
Glass panels: the door are fitted with 4 mm thick glass panel, the glass shelves of the wall units and of the tower units are 8 mm thick.
The base of the sink unit is covered with a steel sheet, having the function of protecting the base from any condensate coming from the drainpipe, corrosive detergents or in case of leakage; the unit is furthermore fitted with an aluminium chain.
Piping recess: the back panels of the tower units and the base units have a 55 mm recess for cables and pipes, while the back panels of the wall units have a 15 mm recess.
The cooling circuit does not contain CFC (which harm the environment), but rather a mixture of alternative gases. The fridge cabinet has a plastic base, which protect the appliance in case of infiltrations, humidity and water leakage. The plinth is in aluminium, and features ventilation holes.
Base of tall fridge units: they are in plastic material, as they have the function of protecting the fridge unit from any condensate or water leakage. They are especially shaped, so as to ensure a correct air circulation, and a longer life of the appliance.

Hobs

Environment

Drawers

We recommend hobs fitted with a safety valve, which stops the flow of gas if the flame goes out accidentally. The hob should be big enough to take more pans at the same time, yet leaving enough space between them.
Eletric appliances: for details on the warranty and after sale service please refer to the leaflet supplied with each appliance.
The company is constantly committed to respecting the environment, and safeguarding workplace safety. A team of engineers follows each step of the production process, with the precise aim of preventing environmental hazards. The company fulfils the requirements of the norms on wastewater (law 319/76), on emissions into the atmosphere (dpr 203/88), on noise (dpcm 1/3/91), and on waste disposal (dpr 915/81).
Packing: All product are packed in boxes made of recyclable cardboard.
The metal sides, which are coated with epoxy paints, are fitted with a limit stop, whichi prevents the drawers from being pulled out completely; the base and the back of the drawers are coated with melamine resins. The front can be adjusted on two dimensions, the drawers have a dynamic capacity of 25 Kg. The drawers are also available in the fully pullout version with safety mechanism. On request the easy closing mechanism "blumotion" we also supply drawers with a stainless steel structure.

Splashbacks

Tables

Hinges

They are in aluminium, and are coated with a decorative sheet in the same colour as the worktop. The visible sections can also be in anodised aluminium; they are fitted with a watertight double rubber profile with a plastic base.The tables have a laminate surfaced top that matches with the kitchen top; the base is in laminate-surfaced stripwood in the same colour as the frame, while the legs are in wood. The metal version features an aluminium colour square metal tube with possibility of glass top.The hinges have been tested to resist 200.000 opening and closing movements. They are made from steel, and feature a quick disengagement system can be adjusted on three axes and have a 110° opening (175° opening in the draining rack).

Frames

Backets

Draining Rack

Jointed spruce, surfaced with a painted wood veneer available in the same colour as the door of the reference model.Sides and slide rails are made of metal, just like the drawers. The can bear loads up to 25/40 Kg and can be conveniently accessorised to meet your specific needs..Stainless steel 18/10 grids, with a drip tray in steel sheet fitted with 175° hinges.



Hoods



The hoods are of ventilation type, in accordance with law 46/90 of 5th March 1990. They can be converted into extraction hoods, by fitting the relevant activated charcoal filters.